What to do in such a case Basic operation of equipment and trouble shooting

Bathroom Ventilator Dryer

• The bathroom ventilator ・ dryer comes equipped with the following functions. Use the control panel to select the desired function.

  Dry (乾燥)	Turn the bathroom into a drying room, just hang your clothes and it will become dry.
  Cool breeze (涼風)	To be used when the bathroom is hot, or can be used as a fan when taking a bath.
  Ventilation (換気・急換気)	Ventilate the bathroom and make dry to prevent mold growth.

  • In some bathrooms the ventilation, dryer models are equipped as well with a heater.

• 

How to use as a clothing dryer

• Dry the washed clothes with wind.

  1. Press the operation switch button, until the dry lamp (乾燥) turn on.Drying operations will start, and air will begin blowing out.
  2. Set the timer according to laundry quantity and the outdoor temperature. It can be setby adjusting the green lights next to the number. Once setup procedures are complete,the internal computer will calculate and display the remaining operation time.
  3. The fan will stop when the timer is finished. If further drying is required, set the timer again and proceed with drying.

• 

  

• The internal computer will memorize your previous setting. When activating the dryer next time, the computer will use your previous setting.
  When you want to change the timer setting, please use the setting button to reset the timer.
• When using the fan to dry clothes, please make sure that the clothes were centrifuged .
• Leave enough space between the clothes to allow air blow evenly through the clothes .

Caution

Dry the washed clothes with wind.
Please observe the followings items to ensure safe use.

• Please clean the filters once a month.
  Clogged filters will result in operational efficiency decreases and breakdowns.
• Ventilate the bathroom after bathing.
• Do not operate the fan without the filter.
• Please do not hang on the unit or clothesline, or hang excessively heavy objects.

Filter maintenance

Pull out the front panel of filter. Lightly dust the net, or clean using a vacuum cleaner. In case the net is very dirty, please wash with water diluted in neutral detergent and after rinse the detergent.
Dry after washing, and replace the filter to the original position. Furthermore, please be careful to not falling down when removing, because the bathroom floor gets slippery.

• Please clean the filters once a month.
  Clogged filters will result in operational efficiency decreases and breakdowns.